14
A150225
6. If no key is pressed for 3 minutes, the configuration mode will auto-
matically exit, returning the thermostat to normal operation.
Option 01 - Equipment type
You may need to make an adjustment to this setting depending on the system
you've connected. If you're unsure about your system type, refer to wiring
diagrams beginning on page 23.
Options:HP,H2,AC,A2,H,C
Description:
SHP controls 1 speed heat pump with 1 stage of auxiliary heat.
SA2 controls two stages of cooling and one stage of furnace heat.
SH2 controls a 2 Speed HP with 1 stage of auxiliary heat.
SAC controls 1 speed air conditioner with 1 stage of heat.
SH operates a heat only system: furnace or fan coil only; no outdoor unit.
SC operates a cool only system: outdoor AC unit with an indoor fan coil; no
strip heater support.
Option 03 - Fahrenheit/Centigrade
Default: Fahrenheit (F)
Selections: Fahrenheit (F), Centigrade (C)
To Next Page
Loading...
Need help?
General
