Parts and Functions
Mode
Intelligent Cooling Heating Fan Dry
The mode cycle depends on the mode setting in the basic setting function.
Up/Down swing and Left/Right swing function.
Fan speed. Dierent fan speed cycles can be set through the basic setting.
Quality online The number of indoor units connected to the wired controller.
Defrost Defrost function.
Standby The state of indoor unit. This area also displays the “operation”.
Master
The state of the wired controller, this area can also display the” slave” icon.
“Master” means the wired controller and is the major controller whereas
“Slave” is the wired controller and can only control parts of the function.
PM 2.5 A++ Reserved function.
Outdoor temp. 22.5
o
F Outdoor temperature display area. It can be set whether on display or not.
Outdoor relative hum 32% Outdoor humidity display area. It can be set whether on display or not.
The above functions are valid only for parts of the model.
6
To Next Page
Loading...
