Operation
Schedule
Schedule options include segmented timing and customized timing. It can be selected through the displayed setting.
The default is the segmented timing.
Segmented timing
(1) The segmented timing will only operate in cooling or heating mode. Time can be adjusted in 24 hours.
The default format of time display is 12-hours. Temperature can be adjusted from 60°F to 86°F (16°C to 30°C).
The “OFF” function can also be set, which shows the power is o.
(2) Once, the left and right arrows ash beside the ‘Wake’ time, press the Enter key for the arrows to be static.
Continue to press Left or Right key to adjust the time followed by the key to conrm. Four direction keys can
move the arrow while they are ashing.
(3) Press the ‘OK’ key to conrm the setting as stated in the prompt below the screen.
(4) The default value is the same as in the gure below.
Press the Menu key in the main interface to enter the menu interface.
Schedule
Sleep Swing
Time Error codeExtra Function
Humidity Control Display Setting
Installer Setting
?
Return Enter Main
Menu
Monday
2011.11.03
10:30 AM
Service help
English
7
To Next Page
Loading...
