Carrier ZS Series - To override the schedule

ZS Plus Sensor
ZS Zone Sensors CARRIER CORPORATION ©2020
User Guide All rights reserved
4
To override the schedule
Timed override to an occupied state
Press the button one time to override the schedule and put the zone in an occupied state for a length of time
specified in the control program's Maximum Duration field.
Press the button again to cancel the override and return control to the schedule.
Force to an unoccupied state
If allowed by the control program, press and hold the button for 3 seconds to force the zone to an unoccupied
state.
Press the button again to cancel the force to unoccupied and return control to the schedule.