Carver Inc 8-1
SECTION EIGHT CARVER, INC. SERVICES
8.1 TECHNICAL ASSISTANCE
CARVER, INC. PARTS DEPARTMENT
Call from 8:00 a.m. to 4:30 p.m., Eastern Standard Time
(260) 563-7577, Extension 237 or 252
The Parts Department at CARVER, INC. is ready to provide the parts to keep your equipment up and running.
Original replacement parts ensure operation at design specifications. Please have the model and serial number of your
equipment available when you call. Consult the Parts List included in your information packet for replacement part
numbers.
CARVER, INC. SERVICE DEPARTMENT
Call from 8:00 a.m. to 4:30 p.m., Eastern Standard Time
(260) 563-7577, Extension 238 or 243
CARVER, INC. has a qualified Service Department ready to install, start-up, or service your press. Gauge calibration
services are available. Contact Service Department for details.
CARVER, INC. SALES DEPARTMENT
Call from 8:00 a.m. to 4:30 p.m., Eastern Standard Time
(260) 563-7577, Extension 252 or 237
CARVER products are sold through a worldwide network of independent sales representatives and distributors, as well
as in-house sales personnel. Contact our Sales Department for the name of the sales representative or distributor nearest
you.
8.2 RETURNED MATERIAL POLICY
CREDIT RETURNS
1. Prior to the return of any material, authorization must be given by CARVER, INC. A RMA number will be
assigned for the equipment to be returned.
2. A reason for requesting the return must be given.
3. All returned material purchased from CARVER, INC. is subject to a 15% ($75.00 minimum) restocking
charge.
4. All returns are to be shipped prepaid.
5. The invoice number and date, or purchase order number and date must be supplied.
6. No credit will be issued for material that is not within the manufacturer's warranty period, and/or in new and
unused condition, suitable for resale.
To Next Page
Loading...
