CAS BW-150 - Count Mode Conversion

13
■ In case of resetting the High / Low value
Display KEY PLATFORM DESCRIPTION
STEP 1 Press twice
STEP 1 Press once (Low weight input)
STEP 1 INPUT Refer to 'Digit input' In page 11
STEP 1 High value input
STEP 1 INPUT Refer to 'Digit input' In page 11
STEP 1 Empty Generally operated
5. COUNT MODE CONVERSION
■ In case of no setting the unit / sample weight
Display KEY PLATFORM DESCRIPTION
STEP 1 Press three times
STEP 2 Empty
Press once
Generally operated
■ In case of setting the unit weight (Min. range of unit weight ; Min. Division)
Display KEY PLATFORM DESCRIPTION
STEP 1 Press three times
STEP 2 Press once
STEP 3 Display the set weight
STEP 3
Input the unit weight
Digit input in page 11
STEP 5
Press 'Mode' key to round & display
unit weight. Generally operated
Step 5. Ex) Min. division is 0.1
Input the unit weight as 0.532 and round off the second place of decimal to 0.5