Need help?Do you have a question about the CAS BW-SERIES and is the answer not in the manual?
Verifies the functionality and state of the scale's liquid crystal display.
Checks the analog-to-digital conversion of the load cell input.
Evaluates the responsiveness and functionality of each key on the scale.
Confirms the serial communication capabilities of the scale.
Sets the maximum weight capacity for the scale.
Configures the smallest measurable weight increment.
Specifies the weight to be used during span calibration.
Establishes the zero point of the scale without any load.
Calibrates the scale's response to a known weight.
To Next Page
General
