1
3. HOLD FUNCTIOIN (Use at weighing the moving object)
■ Auto hold function (Hold function operated whenever weighing)
Empty the platform Press 'Hold' key 'Auto hold'
message is displayed for 1 sec.
Hold lamp is ON
When the weight change is
stable after putting the
Object(20kg) on platform,
'Hold' message is displayed
The weight is averaged for
approx. 3~5 sec.
The hold weight is displayed.
※Hold start is more than 5.5 division and 10% of maximum capacity after displayed hold weight.
■ To release the hold weight Empty the platform or press 'Hold' key and
return to the normal operation
■ Auto hold function release
Empty the platform Press 'Hold' key
Auto hold release message is shown for 1 sec.
And then normally operated. 'Hold' lamp is OFF.
■ Manual hold function (Executed at pressing 'Hold' key)
Put the object (10kg) on
platform
Press 'Hold' key.
'Hold' message is displayed
for 1 sec.
The weight is averaged for
displayed. 3-5 sec.
The hold weight is displayed. Empty the platform or press
'Hold' key to release the hold weight and perform the normal
operation. 'Hold' lamp is OFF
※If change weight is more than 10% of maximum capacity after displayed hold
weight, hold function is cancelled
To Next Page
