3
Notation Conventions
This instruction manual uses the following notation conventions to indicate
Safety Precautions and additional information.
Indicates a potentially hazardous situation that may
result in injury to personnel or equipment damage.
Provides additional information needed to properly
use the balance.
Other conventions used in this manual include:
Item Description
1,2,3....
Indicates the step number in a procedure or a sequence of
changes in the balance display.
[ ] key
Indicates the operation key on the balance. See 2.2.
“ ”
Indicates the message appearing in the balance display.
mass display
Indicates that the balance is in the weighing mode and mass is
displayed in one of the weighing units.
To Next Page
Loading...
