CAS ED Series - Page 19

20
3. How to Enter Date
① Press the MODE key until the
display shows “dy ON”. It means
that date is printed out..
② If you do not want to print out date, press the HOLD(▲) key.
③ Press the SAMPLE(▶) key,
the display shows “00,00,00”.
④ Press the HOLD(▲) or
PRINT(▼) key to have number up
or down. To enter next digit, press
the SAMPLE(▶) key.
⑤ Press the SET key to save.
“dysave” is shown on the display
and then the display shows a day of
the week.
⑥ You can change the day by
pressing the HOLD(▲) or
PRINT(▼) key. If you set up a
day of the week wrong, “Wk err” is
shown on the display.
⑦Press the SET key to save.
“Wksave” is shown on the
display.