CAS ED Series - Page 20

21
⑧ Press the Hold key or Print
key, you can change the
message on display.
⑨ You can see that Date
pattern is changed.
⑩ Press the SET key to save.
“dysave” is shown on the
display shows a day of the
week. If you set up a day of the
week wrong, “dy err” is shown
on the display.
4. How to Enter Time
① Press the MODE key until the
display shows “ti ON”. It means
that time is printed out.
② If you do not want to print out time, press the HOLD(▲) key.
③ Press the SAMPLE(▶) key
to set up time, “00,00,00” is
shown on the display.
④ Press the HOLD(▲) or
PRINT(▼) key to have number
up or down. To enter next digit,
press the SAMPLE(▶) key.
⑤ Press the SET key to save.
“tisave” is shown on the display.