22
5. How to Enter Label Caption
① Press the MODE key until
the display shows “LA off”. It
means that label caption is not
printed out.
② To print out label caption, press the HOLD (▲) key. The display
shows “LA on”.
③ Press the SAMPLE(▶) key,
“WELCOM” is shown on the
display in default.
④ You can program label caption by pressing HOLD(▲) or
PRINT(▼) key. To enter next digit or previous digit, press the MODE
or SAMPLE(▶) key.
⑤ Press the SET key to save. “LA save” is shown on the display.
⑥ If you do not want to save, press the ZERO key.
To Next Page
Loading...
