2
RW-P Series
1. PREFACE
We greatly appreciate your purchase of CAS Road Weigher, which is used for displaying the value
of weight loaded on each shaft of vehicle.
These goods have hold excellent performance and splendid properties through strike tests
as well as devoting ourselves under severe quality management.
Before using road Weigher, It is recommended to read this manual carefully and to apply the
function application fully.
CAUTIONS
- Avoid sudden temperature change.
-
Keep it in dry place.
-
Use this product the place where the ground is flatness and hardness
-
Don’t use this product when it is raining
-
Keep out of muddy area and sandy area
-
When the sands get in the gap between loadcell and foot, remove to use air cleaner
m
a
x
1
°
max 2mm
max 2mm
SAND AREA, CLAY AREA
(To use after cleaning)
2. FEATURE
◆ Slim(height 40mm) type
◆ built in high accuracy load cell