e. Saving PLU name
● C key is to input, save a character, and move to next character (or byte).
● TARE key is to move next programming menu.
①
Input appropriate ASCII codes to save the PLU
name. ※
Please refer to the ASCII table on page
45.
Ex) “APPLE” is “4, 1, C, 5, 0, C, 5, 0, C,
4, C(alphabet), C, 4, 5, C”
② Press TARE key to exit to normal
weighing mode or C key up to maximum
16th byte. Then automatically exit to normal
weighing mode.
■
Please refer to “Alphabetic key location”.
To Next Page
Loading...
