Chapter 3. User’s Set-up Mode
This section explains how to set up the following functions.
Functions Options Remarks
1. Auto power-off NO / 10 / 30 / 60
2. LCD Backlight On/OFF OFF / ON / 3 / 5 / 10
When backlight option selected in
3. Backlight brightness 1 ~ 7 Default 3
4. Low battery
backlight auto off
BL-on / BL-off
5. Suspend Mode 0 / 20 / 40 / 60 Only LED version
6. Printer selection NON / DEP-50 /DLP-50
● Press ZERO key to save current option and move to next function setting mode.
● Press TARE key to move to other next option.
a. Auto power-off
This section explains how to set backlight on & off function and automatic off function.
Table :
① To get into “User’s Set-up Mode”press
ON/OFF key pressing and holding ZERO
key.
To Next Page
Loading...
