CAS S2000JR - Chapter 4. Formatting Printing Receipt

29
Chapter 4. Formatting printing receipt
This chapter explains how to set the receipt format in the following fields.
To set into “Printing format Setup mode” Press ON/OFF key pressing and holding C key.
Options Description Remarks
HEADER
To input characters you wish to have on the receipt
header.
Maximum 1,2 line / 24
characters,
3 line / 16
characters for each line
UNIT
(Currency)
To input currency symbol or characters you wish to
have on the receipt.
Maximum 8 characters
DATE
To input date on the receipt.
a. Setting the printer
Please connect your printer to RS-232 port, which is located at the gray part on the picture, using RS-232
cable.