CAS S2000JR - Page 35

36
⑤ Press C key to go to next “Second”
setting.
⑥ Just input appropriate second you wish to have,
not using ASCII code.
Ex) Second 56
f. Receipt Date format setting
⑤ Press C key to go to next “Date format”
setting.
⑥ Just input a number according to below table.
Number
Date format
0
Year / Month / Date
1
Date / Month / Year
Ex) Press “1” to use DD/MM/YY print format
● If you press C or T(TARE) key you cas automatically go to nomal weighing mode.