Casa Systems C100G - System Administration Configurations; Configuration Message and SSH Keys; System Time and NTP Configuration; DNS and User Management

8
clear cable modem <cm MAC
address>
show mpls vpls casalab_vpls detail
configure interface cable-mac 101.2 cable
helper-address 10.10.10.10
configure interface cable-mac 101.2 ip vrf
forwarding CUSTOMER_1
SysAdmin Configurations
enable “Save
Configuration” message
system reboot confirm
configure SSH keys
ssh-server gen-hostkey ?
configure crypto key generate dsa
set system time
show timezone list
system timezone <string>
system clock <MMDDhhmmYYYY>
show clock
configure clock timezone <timezone
name> | <GMT [+ | -hh[ :mm]]
configure clock set
<yyyy:mm:dd:hh:mm:ss>
show clock [detail] [GMT] [network]
[timezone]
configure NTP
ntp server 10.4.1.3
ntp sync 10.4.1.3
configure ntp server <ipv4 addr>
[broadcast] [burst] [key] [manycast]
[maxpoll <4-11>] [minpoll
<4-11>] [multicast] [prefer] [version <2-
4>]
configure ntp server <ipv4 addr> [
broadcast | multicast | manycast ]
configure DNS
nameserver 10.4.1.3
configure ip name-server <server-
address>
configure ip domain-lookup
configure Privileged Mode
password
password <password>
configure enable password <password>
privilege <0-15>
encrypt passwords in
running config
service password-encryption
This is the default on the E6000
add local user
adduser ckent privilege 15
Superman15
configure username <userid> password
<password> privilege <0-15>
delete local user
deluser jimmy
configure no username <userid>