Casa Systems C100G - CLI Aliases, Logging, and SNMP Configuration; CLI Alias Creation; Local Logging and Syslog; SNMP Configuration

9
Casa commands
ARRIS commands
create CLI aliases
alias ccm “clear cable modem”
alias cpu “show cpu-process | esc
00:00:00
alias du “show docsis downstream
channel utilization”
alias scgv “show service group
verbose”
alias scm “show cable modem”
alias scmv “show cable modem
verbose”
alias uptime “show cpuinfo all | i
up”
alias crs “copy running-config
startup-config”
alias ccm clear cable modem
alias scgv show cable service group
alias scm show cable modem
configure local logging
show logging all
logging system informational
logging system errors
show logging
configure logging console 7
configure logging console 3
configure Syslog
logging host 10.4.1.3
logging syslog warning
show syslog
logging source-interface loopback
configure logging host <ip address>
configure logging syslog 3
show logging syslog
configure SNMP
snmp default
snmp community readmibs ro
snmp community letmewrite rw
device contact admin@casa-
systems.net
device location training_lab
configure snmp-server community
readmibs security rotesting
configure snmp-server community
letmewrite rwtesting
configure snmp-server contact <contact
information string>
configure snmp-server location
<location>
configure SNMPv2
nmp tgt-addr class-srv2
snmpUDPDomain 10.4.1.4 500 1
TrapV2cSNMPv2cTrapsTagList
TrapV2cSNMPv2cTraps non-
volatile 0.0.0.0 500
snmp inform version 2
snmp notify tapUserTrapTagList
tapUserTrapTagList trap non-
volatile
snmp trap-source loopback 0
device contact admin@www.casa-
systems.net
device location training_lab