Casa Systems C100G - Trap and Access Control Configuration; Trap Configuration; SNMP Community with Restricted Access; PIM Trap Configuration

10
Casa command
ARRIS command
configuring traps
interface docsis-mac 1
cm trap
cm trap interval 10
exit
configure cable enable-trap
configure SNMP
communities
snmp community casaadmin rw
snmp community casastudent ro
configure snmp-server community
casaadmin security rwtesting
configure snmp-server community
casastudent security rotesting
create SNMP community
with restricted access to
the MIB tree
ip access-list limit-snmp
permit snmp 10.4.1.4
255.255.255.255 <your loopback
IP>
deny snmp any any
exit
show ip access-list limit-snmp
snmp tree-family scout
1.3.6.1.4.1.20858.10.24 – include
non-volatile
snmp access scout-grp – snmpv2c
no-auth exact scout scout scout
non-volatile
snmp security snmpv2c scoutgrp-
usr scout-grp non-volatile
snmp community imagereader ro
security scoutgrp-usr access-group
limit-snmp
configure PIM traps
ip pim trap invalid-pim-message
enable
ip pim trap neighbor-change enable
ip pim trap rp-mapping-change
enable