Cascade H Series - Page 13

INSTALLATION
11
6095756-R2 EN
7
Install and engage lower hooks
ADJUST
RC1130.eps
cascade
®
C-675514-1
RC1131.eps
BOLT-ON TYPE
QUICK-CHANGE TYPE
Lower
Carriage
Bar
Lower
Carriage
Bar
Install hooks,
tap light into
position
Tighten capscrews:
Class II/III – 165 Nm
Class IV – 265 Nm
Inspect hooks for
excessive clearance.
Reverse guides to
change clearance.
Refer to step 2.
Slide hook up
to engage bar,
install pin in
locked position
(upper hole).
5 mm
maximum
8
Connect hoses to hose terminal
fittings as shown in step 3
INSTALLATION USING Rh & LH 2-PORT
THINLINE
TM
HOSE REELS, SINGLE IHR:
INSTALLATION USING RH 2-PORT HOSE
REEL and LH 4-PORT HOSE REEL:
RC3758.eps
RC3759.eps
Clamp/
Release
Clamp/
Release
Rotate
CW/CCW
Rotate
CW/CCW
Swing
RH/LH
Swing
RH/LH