27
To activate the AUTO FLOAT for the front
hitch be sure that before you press long
the dedicated buttons the implement is
not able to be pressed on the ground. Set
the maximum working depth shortly
above the ground level and then engage
the AUTO FLOAT.
Engaging AUTO FLOAT mode:
Keep shift & down pressed for 3 seconds.
Æ after, every time front hitch is lowered
it will go down to set work position and
then into FLOAT.
Disengaging AUTO FLOAT mode:
Keep shift & up pressed for 3 sec.
SHIFT
4. Operate front hitch with up/down
buttons plus shift button on MC.
Shift + up Æ hitch raises to height set-
point
Shift + down Æ hitch lowers to work
position set point.
To Next Page
Loading...