33
Ride Control
When transporting equipment on the three-
point hitch, implement bounce can lead to
lack of steering control at transport speeds.
With ride control selected, when the front
wheels hit a bump, causing the front of the
tractor to rise, the hydraulic system will
immediately react to counter the movement
and minimize implement bounce to provide a
smoother ride.
Ride control will only operate at speeds above
8 km/h. When tractor speed exceeds 8 km/h
the implement will be lowered by 4 - 5 % as
the hydraulic system makes corrections to
counteract implement bounce. When tractor
speed falls below 8 km/h the implement will
raise again to the height set by the height
limit control and ride control will become
inoperative.
To Next Page
Loading...