32
Work Condition Settings
AUTO EDC
If manual EDC is chosen
the point of counting and
not counting the worked
are or fuel consumption
can be chosen. This is
moe o le he hectar
cone.
Hydraulic stabilizers
The implement can
automatically be centred
and stabilised at any
height of lift.
Lock or unlock for raising
the linkage.
Lock or unlock for lowering
the linkage.
Values can be stored to
different implements!
Slip control prevent slip
When the actual slip is
more than the limit, the
linkage will raise to allow
greater weight transfer.
When slip decreases the
linkage returns to the pre-
selected position.
Slip values are regulated
with potentiometer
situated below the arm
rest cover.
To Next Page
Loading...