2001-11
Rac 6-13070 Printed in U.S.A.
Template Name: SM_2_col
Template Date: 2000_01_13
STEP 42
MD02A241
Install an OEM 4130 Load Rotor on the two engine
lifting brackets. Attach the Load Rotor to an overhead
hoist.
IMPORTANT: The engine lifting brackets are for
vertical lifting only. Any lifting device that is not in-line
vertically with the lifting brackets can damage the
engine rocker arm cover or cause bracket failure.
STEP 43
MD02A237
MD02A238
Remove the lock nut and washer from the RH (1) and
LH (2) rear engine mounts.
STEP 44
MD02A239
Remove the lock nuts, flat washers and bolts from
the front engine mount.
STEP 45
MD02A246
Use the hoist to lift the engine until the oil pan will
clear the front crossmember and move the engine
forward out of the tractor.
1
2
To Next Page
Loading...
