Case IH STX425 - Engine Installation Procedure Steps

2001-12
Rac 6-13070 Printed in U.S.A.
Template Name: SM_2_col
Template Date: 2000_01_13
ENGINE INSTALLATION
STEP 46
MD02A248
Install an OEM 4130 Load Rotor on the two engine
lifting brackets. Attach the load rotor to an overhead
hoist.
IMPORTANT: The engine lifting brackets are for
vertical lifting only. Any lifting device that is not
vertically inline with the lifting brackets can damage
the engine rocker arm cover or cause bracket failure.
STEP 47
MD02A247
Install the large flat washers (1) on the front and rear
engine mount isolators. Install the rear engine mount
bolts in the engine mount brackets.
Lift the engine until the oil pan will clear the front
frame engine mount crossmember (2).
STEP 48
MD02A242
Move the engine rearward and use the rear engine
mount bolts as guides to lower the engine on the
mounts.
STEP 49
MD02A240
Install the two front engine mount bolts (1), large flat
washers (2), flat washers (3) and lock nuts (4).
Tighten the bolts to specifications.
1
2
2
1
1
2
4
3
3
4