Need help?Do you have a question about the Case IH STX425 and is the answer not in the manual?
Details torque specifications for decimal hardware, including Grade 5 and Grade 8 bolts, nuts, and studs.
Provides torque specifications for metric hardware, covering Grade 8.8, 10.9, and 12.9 bolts, nuts, and studs.
Lists torque specifications for steel hydraulic fittings, including 37-degree flare, O-ring straight threads, and split flange bolts.
Lists specific torque values for various bolts and components during engine removal and installation procedures for STX 275/325.
Details the step-by-step process for removing the engine from STX 275 and STX 325 tractors, covering initial preparations and disconnection.
Details the step-by-step process for installing the engine into STX 275 and STX 325 tractors, including reassembly and final checks.
Highlights important safety messages, warnings, cautions, and dangers to prevent injury or death during operation and maintenance.
Details safety rules for ROPS, emphasizing inspection after accidents, avoiding modifications, and using correct replacement parts.
Lists specific torque values for various bolts and components during engine removal and installation for STX 375/425/450.
Details the step-by-step process for removing the engine from STX 375, STX 425, and STX 450 tractors, covering initial preparations.
Details the step-by-step process for installing the engine into STX 375, STX 425, and STX 450 tractors, including reassembly.
To Next Page
General