4 - 18
DIAGNOSTIC - SELECTION
CASE TRAINING CENTER
AUGUST 2000
CHANGING THE LANGUAGE CODE
Display the excavator model confirmation screen
(press the auto mode switch for 10 seconds).
To change the language code, press the travel mode
switch to display the required code.
To confirm the language code, press the work mode
switch and the audible warning device sounds.
Turn the starter key switch to OFF.
Example:
In the screen opposite, the language code has
changed from 5 (French) to 1 (English).
MACHINE : SH0120- 3
TERRITORY : 3 LANGUAGE : 1
CONT. P / N KHR2669
To Next Page
Loading...
