DIAGNOSTIC - SELECTION
4 - 19
CASE TRAINING CENTER
AUGUST 2000
ANTI-THEFT DEVICE
To prevent the machine from being stolen it is possible to
use the anti-theft system, which makes it necessary for a
special code to be entered before the machine can be
operated.
Your CASE Dealer can do this for you.
Once this operation has been performed, a special
access code has to be entered each time you start the
engine.
IMPORTANT: Once the code has been entered, do
not forget it, as it can not be changed without consult-
ing your CASE Dealer.
Entering the code
Step 1
Place the starter switch key in “ON” position.
Step 2
he message “Password” and four boxes will appear on the
display screen.
Step 3
To enter the code (e.g. 1234) press button (1) the same
number of times as the digit selected (e.g. once), then
press button (2) to proceed to the second digit. Press the
button (1) same number of times as the second digit (e.g.
twice) and then press button (2) to proceed to the third
digit. Repeat the procedure for the third and fourth digits.
Step 4
Once all four digits have been entered, press button (3) for
the code to be entered in the system. The audible alarm
device will sound.
1
2
3
To Next Page
Loading...
