Case CX130B - Main Body and Component Dimensions; Engine Model, Type, and Specifications; Cooling System Components and Specifications

Lep SC130B1002-1NA Issued 05-08
1002-11
Main body dimensions
Main body width ..............................................................................................................See machine overall dimensions
Upper side swing body width ................................................................................................................. 2540 mm (100 in)
Cab width ............................................................................................................................................ 1000 mm (39.37 in)
Main body height............................................................................................................................... 2820 mm (111.02 in)
Tail swing radius.................................................................................................................................. 2130 mm (83.86 in)
Swing body tail distance...................................................................................................................... 2130 mm (83.86 in)
Swing body rear section bottom height................................................................................................. 895 mm (35.24 in)
Distance between tumblers............................................................................................................... 2790 mm (109.84 in)
Overall track length ........................................................................................................................... 3500 mm (137.79 in)
Width of track shoe ................................................................................600 mm (23.62 in), (Optional: 500 mm (19.68 in)
Minimum ground clearance (To bottom of lower frame)........................................................................ 460 mm (18.11 in)
Minimum ground clearance (To bottom of Blade) ................................................................................. 380 mm (14.96 in)
Dozer Blade
Width of Blade .............................................................................................................................. 2590 mm (101.97 in)
Height of Blade ................................................................................................................................. 570 mm (22.44 in)
Maximum lift above ground............................................................................................................... 380 mm (14.96 in)
Minimum drop below ground............................................................................................................. 370 mm (14.57 in)
Engine
Name............................................................................................................................................................ISUZU, 4JJ1X
Type: ........................................................4-cycle, water-cooled, overhead camshaft, vertical in-line, direct injection type
............................................................................................................................... (electronic control), with turbocharger.
No. of cylinders - bore x stroke.........................................................................4 - Ø95.4 mm x 104.9 mm (3.76 x 4.13 in)
Displacement .......................................................................................................................................2999 cc (183 cu-in)
Compression ratio........................................................................................................................................................17.5
Rated output ........................................................................................................................................... 95 HP/ 2000 rpm
Maximum torque .................................................................................................. 359 N.m (264.78 lb-ft) / 1600 rpm min
-1
Engine dimensions (LxWxH)........................................................................... 928x760x888 mm (36.53 x29.92x34.96 in)
Oil pan...............................................................................................................................All direction 0.61 rad, inclinable
Oil pan capacity.................................................. Maximum: 15 L (3.92 gal) Minimum: 11 L (2.91 gal) (excluding oil filter)
Direction of rotation...................................................................................................................... Right (as seen from fan)
Starter, reduction type........................................................................................................................................24 V, 4 kW
Alternator, AC type............................................................................................................................................. 24 V, 50 A
Battery..................................................................................................................................................2 x 12V, 92 Ah/5 Hr
Cooling system
Fan type ........................................................................................... Ø 550 mm (21.65 in), suction type - 8 blades, intake
Radiator
Fin type...................................................................................................................................................................wavy
Fin pitch ............................................................................................................................................. 3.5 mm (0.137 in)
Oil cooler
Fin type...................................................................................................................................................................wavy
Fin pitch ............................................................................................................................................. 3.5 mm (0.137 in)
Inter-cooler
Fin type...............................................................................................................................................triangular straight
Fin pitch ............................................................................................................................................. 4.0 mm (0.157 in)
Fuel cooler
Fin type...................................................................................................................................................................wavy
Fin pitch ............................................................................................................................................. 4.0 mm (0.157 in)