Lep SC130B1002-1NA Issued 05-08
1002-12
Capacity of coolant and lubricants
Coolant..................................................................................................................................................... 14.6 L (3.86 gal)
Fuel ........................................................................................................................................................... 260 L (68.7 gal)
Lubricant for engine..................................................................................................................................... 17 L (4.49 gal)
Lubricant for travel reduction gear (per side).............................................................................................. 2.1 L (0.55 gal)
Lubricant for swing reduction gear (per side) ............................................................................................. 2.2 L (0.58 gal)
Hydraulic oil............................................................................................................................................. 157 L (41.47 gal)
Capacity of hydraulic oil tank..................................................................................................................... 82 L (21.66 gal)
Air conditioning
R134 gas load ..............................................................................................................................................1Kg (2.20 Ibs)
Hydraulic oil filter
Suction filter (inside tank)....................................................................................................................................105 mesh
Return filter (inside tank) ............................................................................................................................................ 6 µm
Pilot line filter (inside housing).................................................................................................................................... 8 µm
Fuel filter
Main filter.................................................................................................................................................................... 4 µm
Pre-filter.................................................................................................................................................................... 10 µm
Operating devices
Operator's seat
Location: left side
Structure: Adjustable forward and back and up and down, reclining mechanism, with seat suspension.
Cab
Sealed steel type, all reinforced glass.
Levers and pedals
For travel use: Lever and pedal type (hydraulic pilot type) (x2)
For operating machine use: Lever type (hydraulic pilot type) (x2)
Instruments and switches
Work mode select switch: 3 modes (SP / super power, H / heavy duty, A / automatic)
Travel mode select switch: Low-speed / high-speed switch type
One-touch idle: Knob switch type
Engine emergency stop: Switch type
Monitor device
Machine status display (full-dot liquid crystal)
Work mode selection status: SP / H / A
Instruments (full-dot liquid crystal, except for hour meter)
Fuel gauge: bar graph indicator
Engine coolant temperature gauge: bar graph indicator
Hydraulic oil temperature gauge: bar graph indicator
Hour meter: digital type
Machine Status and Warning Alarms (full-dot liquid crystal and warning tone) *Items have a warning alarm
Lighting
Horn: electric horn (x2)
Other
Wiper with intermittent function, Window washer, Air conditioner, Rear view mirrors (left and right), Clock
Over heat* Battery charge* Faulty electrical system*
Refill fuel* Engine oil pressure* Refill coolant*
Engine preheat Auto warm-up Air cleaner clogged
Anti-theft device triggered Faulty engine system Engine emergency stop
Working light Cab top: 24V, 70W (x1)
Boom up: 24V, 70W (x1)
Interior light 24V, 10W (x1)
To Previous Page
Loading...
