Lep SM130BTOC-1NA Issued 11-08
DIVISION/SECTION SECTION N° REFERENCE N°
8 UPPERSTRUCTURE HYDRAULICS
Depressurising and decontaminating the hydraulic system, use of the
vacuum pump and bleeding the components..............................................8000 SM160B8000-0NA
Specifications, troubleshooting, checks and
hydraulic pressure settings..........................................................................8001 SC130B8001-0NA
Removal and installation of the hydraulic reservoir .........................................8002 SM130B8002-0EN
Removal and installation of the main hydraulic pump......................................8003 SM130B8003-0EN
Removal and installation of the main hydraulic control valve...........................8004 SM130B8004-0EN
Removal and installation of the attachment cylinders......................................8005 SM130B8005-0EN
Removal and installation of the hydraulic swivel..............................................8006 SM130B8006-0EN
Removal and installation of the pilot blocs.......................................................8007 SM130B8007-0EN
Disassembly and assembly of the main hydraulic pump .................................8010 SM130B8010-0EN
Disassembly and assembly of the main hydraulic control valve ......................8011 SM130B8011-0EN
Disassembly and assembly of the attachment cylinders .................................8012 SM130B8012-0EN
Disassembly and assembly of the hand control levers ....................................8013 SM130B8013-0EN
Disassembly and assembly of the foot control levers ......................................8014 SM130B8014-0EN
Disassembly and assembly of the cushion valve.............................................8016 SM130B8016-0EN
Removal and installation of the safety valve....................................................8017 SM130B8017-0EN
Disassembly and assembly of the swing motor...............................................8019 SM130B8019-0EN
Hydraulic functions ..........................................................................................8020 SC130B8020-0NA
Hydraulic component functions........................................................................8030 SC130B8030-0NA
9 UPPERSTRUCTURE
Removal and installation of the counterweight ................................................9002 SM130B9002-0EN
Removal and installation of the boom, dipper and bucket ...............................9003 SM130B9003-0EN
Removal and installation of the seat................................................................9004 SM130B9004-0EN
Removal and installation of the cab and cab equipment .................................9005 SM130B9005-0EN
Air conditioner functions and troubleshooting..................................................9006 SC210B9006-1NA
Air conditioning unit .........................................................................................9007 SM130B9007-0EN
Air conditioning components............................................................................9009 SM130B9009-0EN
Large size hydraulic schematics................................................................... Pocket 87725726A
Large size electrical schematics................................................................... Pocket 87594014B
NOTE: CNH Company reserves the right to make changes in the specification
and design of the machine without prior notice and without incurring any obliga-
tion to modify units previously sold.
The description of the models shown in this manual has been made in accord-
ance with the technical specifications known as of the date of design of this
document.
To Next Page
Loading...
