Case CX160B - Capacities and Operating Devices; Fluid Capacities and Filters; Operators Seat and Cab; Controls and Instruments

Lep SM160B1002-1EN Issued 07-09
1002-11
Capacity of coolant and lubricants
Coolant..................................................................................................................................................... 14.6 L (3.86 gal)
Fuel ........................................................................................................................................................... 300 L (79.5 gal)
Lubricant for engine .................................................................................................................................... 17 L (4.49 gal)
Lubricant for travel reduction gear (per side)
CX160B ................................................................................................................................................. 5.8 L (1.53 gal)
CX180B ................................................................................................................................................. 4.5 L (1.18 gal)
Lubricant for swing reduction gear (per side)................................................................................................ 5 L (1.32 gal)
Hydraulic oil............................................................................................................................................. 165 L (43.59 gal)
Capacity of hydraulic oil tank .................................................................................................................... 90 L (23.77 gal)
Hydraulic oil filter
Suction filter (inside tank)....................................................................................................................................105 mesh
Return filter (inside tank).............................................................................................................................................6 µm
Pilot line filter (inside housing) ....................................................................................................................................8 µm
Fuel filter
Main filter.....................................................................................................................................................................4 µm
Pre-filter.....................................................................................................................................................................10 µm
Operating devices
Operator's seat
Location: left side
Structure: Adjustable forward and back and up and down, reclining mechanism, with seat suspension.
Cab
Sealed steel type, all reinforced glass.
Levers and pedals
For travel use: Lever and pedal type (hydraulic pilot type) (x2)
For operating machine use: Lever type (hydraulic pilot type) (x2)
Instruments and switches
Work mode select switch: 3 modes (SP / super power, H / heavy duty, A / automatic)
Travel mode select switch: Low-speed / high-speed switch type
One-touch idle: Knob switch type
Engine emergency stop: Switch type
Monitor device
Machine status display (full-dot liquid crystal)
Work mode selection status: SP / H / A
Instruments (full-dot liquid crystal, except for hour meter)
Fuel gauge: bar graph indicator
Engine coolant temperature gauge: bar graph indicator
Hydraulic oil temperature gauge: bar graph indicator
Hour meter: digital type
Machine Status and Warning Alarms (full-dot liquid crystal and warning tone) *Items have a warning alarm
Lighting
Horn: electric horn (x2)
Other
Wiper with intermittent function, Window washer, Air conditioner, Rear view mirrors (left and right), DC converter,
Clock
Over heat* Battery charge* Faulty electrical system*
Refill fuel* Engine oil pressure* Refill coolant*
Engine preheat Auto warm-up Air cleaner clogged*
Anti-theft device triggered* Faulty engine system* Engine emergency stop*
Working light Tank: 24V, 70W (x1)
Boom: 24V, 70W (x1)
Cab: 24V, 70W (x2)
Interior light 24V, 10W (x1)