1 - GENERAL INSTRUCTIONS
18
FLUIDS AND LUBRICANTS
Lubricants must have the correct properties for each
application.
ENGINE OIL
IMPORTANT: Use high quality oil and respect the oil
changing intervals so as to ensure maximum engine life.
Categories of oil to be used : CASE N°1 Multiperform-
ance or Performance or API/CG/CF.
The type of oil to use depends on ambient temperature:
- SAE 15W40: All seasons
- SAE 10W30: Winter
- SAE 5W30: Arctic
The following table gives the temperature ranges for dif-
ferent oils, depending on their viscosity.
(A) Fahrenheit Temperature
(B) Celsius Temperature
(*) Use of an engine oil heater is required
NOTE: Do not put any Performance Additive or other additive in the sump. Oil change intervals shown in this manual
are based on tests carried out on lubricants.
WARNING
The conditions of use for individual fluids and
lubricants must be respected.
To Next Page
Loading...
