1 - GENERAL INSTRUCTIONS
3
INTRODUCTION
This series of Vibratory Rollers is suitable for compac-
tion of all kinds of ground and for large and average-
scale site pretaration in highway construction (construc-
tion of highways, railways, airports), in hydro-engineer-
ing (construction of dams), in building construction
(industrial areas, ports), and the like.
These machines are manufactured in compliance with
the latest developments and standards, which ensure
their safe function.
If the machine is used incorrectly, by untrained opera-
tors or for other purposes than those stipulated within,
there is a danger of an accident or damage to the
equipment or injury to personnel.
The main purpose of this manual is to give the informa-
tion necessary for carrying out assembly and disas-
sembly of the machine as well as service repairs of
main assemblies of the equipment. It contains technical
and installation data, instructions on how to adjust the
machine and how to use special tools, fixtures and aids.
The manufacturer continuously seeks to make product
improvements on the basis of experience and latest
developments in the field.
For this reason, the manufacturer may make some
changes in drawings, descriptions and designs in this
manual.
To Next Page
Loading...
