SECTION 1 -- SAFETY FEATURES AND VEHICLE OPTIONAL SAFETY
1-- 8
GENUINE SPARE PARTS
All maintenance on these machines must be carried
out using original parts.
By allowing use of non--original parts, you run a risk:
-- Legally, of being liable in the event of an accident.
-- Technically, of causing breakdowns to occur or of
reducing your machine service life.
Remember:
Any user who procures parts from another quarter
does so at his own risk.
Any user who modifies his machine or has it modified
by a service company, must accept the liability for
such modification.
The certificate of compliance only binds the maker
for parts chosen or produced under maker’ s control.
The maker sets out the practicalities of maintenance
terms. The maker is in no way liable to the event of
the user not complying with such terms.
Using counterfeit parts or components not approved
by the manufacturer will affect warranty terms and
could lead the maker to withdraw the machine certifi-
cate of compliance.
IMPORTANT: Allowing your local approved dealer to
maintain your machine, you are legally covering
yourself and receive the benefits of:
-- Guaranteed quality of work.
-- Original replacement parts.
-- Help with preventive maintenance.
-- Effective help with diagnosing faults.
Only the manufacturer knows the details of the Tele-
handler design and therefore has the best techno-
logical capability to carry out maintenance.
GENERAL CONSIDERATIONS
Only qualified and trained staff can use the Tele-
handler. Its use is subjected to a driving permit
granted by the person in charge in the operator’s
company and subject to local legislation.
The operator should always keep an updated driving
permit during service.
The driver is not competent to authorise driving of the
Telehandler by another person.
Moreover, the use must be in conformity with
accepted practice in the profession.
The operator who finds that the Telehandler is not in
good working condition or does not comply with the
safety instructions, must inform immediately the per-
son in charge.
The driver is forbidden to carry out any repair or
adjustment by himself. He shall keep his Telehandler
perfectly clean, if he is in charge of this.
A copy of the Operator’s Manual must always be in
the machine, in the place provided and in the lan-
guage understood by the driver.
The machine must only be started or operated from
the driver’s cab.
Respect safety instructions and the instructions
described on the machine.
Make sure to replace every plate or DECAL, which
becomes unreadable or damaged.
To Next Page
Loading...
