May 2015 Page 30 of 51
Example data is shown for ISO D1 settings (left) and OSHA D1 & D2 (right)
From this screen it is also possible to Start, Stop or Pause a measurement run. Touch and
hold the appropriate icon in the lower part of the mobile device’s display for 3 seconds during
which time a countdown will be displayed. If a measurement run is started and the dBdage2
display has timed-out, the display will turn on to indicate that a run has started but time-out as
per the setting in Section 7.4 (and similarly when a run is stopped).
10.4 Connection menu
MENU (shown top right in the monitor screen contains a number of options to facilitate the
convenient transfer of the measurement results via the device’s email or clipboard services.
To Next Page
Loading...
Need help?
General
