CashCode FrontLoad MFLV-2110 - Interface Connection; Opto-isolated Interface (Type 1)

page 1-38 Part 1. Operation Manual Rev. 03-2004
Bill Acceptor FL Series Service Manual
Socket DR1-12-2SC-FO (JAE)
Contact DR-SC20-1-7000 (JAE)
Signal descriptions for the Opto-isolated version (Type1):
LANIMRET LANGIS NOITCNUF YTIVITCA
1
CDV21+REWOP---
2
SER-MTESERRETSAMWOL
3
CDV21+REWOPECAFRETNI---
4
DNGDNUORGECAFRETNI---
5
+DELEDONADEL---
6
CNDETCENNOCTON---
7
DNGDNUORGREWOP---
8
DXTATADDETTIMSNARTWOL/HGIH
9
DXRATADDEVIECERWOL/HGIH
01
CNDETCENNOCTON---
11
-DELEDOHTACDEL---
21
CNDETCENNOCTON---
The FrontLoad Bill Validator has the flexibility to offer four different hardware interface options:
Type 1: Opto-Isolated, 12 Volt CC FLBDP.
Type 2: RS232 levels, 12 Volt CCNET (single slave mode) or CC-BDPS.
Type 3: Isolated Pulse Low Current, 12 Volt CC-IPL.
Type 4: RS232 levels, 24 Volt DC, CCNET (single slave mode) or CC-GPC22.
For detailed interface descriptions, please refer to the corresponding Interface Description Manual.
The manual may be downloaded from the CashCode website at www.cashcode.com .
The type of interface hardware depends on the base assembly interface module.
Pin Assignment (cable connector):
INTERFACE CONNECTION
INTERFACE
CONNECTION