CashCode FrontLoad MFLV-2110 - DIP Switch SW1 Settings

page 1-42 Part 1. Operation Manual Rev. 03-2004
Bill Acceptor FL Series Service Manual
HCTIWS NO FFO
1.1WS
elbanE1#noitanimoneDelbasiD1#noitanimoneD
2.1WS
elbanE2#noitanimoneDelbasiD2#noitanimoneD
3.1WS
elbanE3#noitanimoneDelbasiD3#noitanimoneD
4.1WS
elbanE4#noitanimoneDelbasiD4#noitanimoneD
5.1WS
elbanE5#noitanimoneDelbasiD5#noitanimoneD
6.1WS
elbanE6#noitanimoneDelbasiD6#noitanimoneD
7.1WS
elbanE7#noitanimoneDelbasiD7#noitanimoneD
8.1WS
elbanE8#noitanimoneDelbasiD8#noitanimoneD
DIP SWITCH SW1 SETTINGS:
For a complete explanation of switch descriptions, please see the software version
description.
A series of (8) position DIP switches (SW1) define the settings and program the Bill Validator to
recognize and validate a variety of different bill denominations.
SWITCH
SETTING
ON State of switch
OFF State of switch