CashCode FrontLoad MFLV-2110 - DIP Switch SW2 Settings

Rev. 03-2004 Part 1. Operation Manual PAGE 1-43
FrontLoad Bill Validator Series - Operation and Service Manual
RETEMARAP HCTIWS NO FFO
llibehtfonoitatneirO 1.2WS
yaW-ruoFyaW-enO
2.2WS
devreseRdevreseR
noitacinummocecafretnI
deeps
3.2WS
sPB0069sPB00291
edoM 4.2WS
edoMecivreSedoMnoitadilaV
The (4) position DIP switches (SW2) are defined below:
For additional information on switch features and explanations, please see the software
description for your particular Bill Validator.
ON State of switch
OFF State of switch