EN-13
• If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting (page EN-46).
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
• Auto Receive
With auto receive, the watch receives the time calibration signal automatically up
to six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see “About Auto Receive”
(page EN-18).
• Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive” (page EN-24).
To Next Page
Loading...
