EN-16
4. When the setting you want to change is flashing, use B and D to change it as
described below.
Setting Screen Button Operations
UTC Differential
Use B (–) and D (+) to change the setting.
• You can specify a value in the range of –12.0 to
+14.0, in 0.5-hour units.
Longitude Value
Use B (–) and D (+) to change the setting.
• You can specify a value in the range of 0° to 180°,
in 1-degree units.
East Longitude/
West Longitude
Use D to switch between east longitude (E) and
west longitude (W).
• When the DST setting is on, the UTC differential can be set in a range of –11.0
to +15.0 in 0.5-hour units.
5. Press A to exit the setting screen.
To Next Page
Loading...
