EN-45
Button Operation Tone
The button operation tone sounds any time you press one
of the watch’s buttons. You can turn the button operation
tone on or off as desired.
• Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Timer Mode alarm all operate
normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down C to toggle the button operation
tone on (
not displayed) and off ( displayed).
• Holding down C to turn the button operation tone on or
off also causes the watch’s current mode to change.
• The
indicator is displayed in all modes when the
button operation tone is turned off.
To Next Page
Loading...
