EN-29
3. While a setting is flashing, use B and D to change it as described below.
Screen To do this: Do this:
Change the hours or minutes
Use B (–) and D (+).
Toggle auto-repeat on (On) and off (OF)
Press D.
• To specify a countdown start time of 24 hours, set 0:00.
4. Press A to exit the setting screen.
• The auto-repeat on indicator (
) is displayed on the Timer Mode screen while
this function is turned on.
• Frequent use of auto-repeat and the alarm can run down battery power.
To Next Page
Loading...
Need help?
General
