EN-33
3. Press C to move the flashing in the sequence shown below to select other
settings.
C
Hour DayMonth
C C
Minute
C
4. While a setting is flashing, use B (–) and D (+) to change it.
• To set an alarm that does not include a month (daily alarm, monthly alarm), set
for the month. Use B and D until the mark appears (between 12 and 1)
while month setting is flashing.
• To set an alarm that does not include a day (daily alarm, 1-month alarm), set
for the day. Use B and D until the
mark appears (between the end of the
month and 1) while the day setting is flashing.
• If you are using 12-hour timekeeping, P (p.m.) or A (a.m.) will be indicated for
alarm times.
• When setting an alarm time using 12-hour timekeeping, take care to set the time
correctly as a.m. (A indicator) or p.m. (P indicator).
To Next Page
Loading...
