EN-40
4. When the setting you want to change is flashing, use B and D to change it as
described below.
Screen To do this: Do this:
Toggle between Daylight Saving Time (On) and
Standard Time (OF)
Press D.
Change the hour or minute
Use B (–) and D (+).
• If you are using 12-hour timekeeping, P (p.m.) or A (a.m.) will be indicated for
the time.
5. Press A to exit the setting screen.
• The DST indicator on the Dual Time Mode screen indicates that DST is turned
on for the Dual Time Mode time.
To Next Page
Loading...
