Casio 3568 - Page 26

Using the Training
Function
The Training Mode uses an accelerometer to
measure and record distance, elapsed time,
pace, and other data while you are running or
walking.
You can review recorded data on the watch or
with G-SHOCK MOVE.
Run Timing
Using the Training Function, start running.
●
Starting Run Timing
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (B).
This displays the Training Mode screen.
Training Mode
3. Press (B).
Start run timing.
●
Pausing Run Timing
1. While the run timing screen is displayed,
press (B).
This pauses run timing and displays the
pause menu screen.
Pause menuPause
2. Use (A) and (C) to select what you want to
do with the run timing data you have just
measured.
[RESUME] Resumes timing.
[SAVE] Saves data.
[DELETE] Deletes data.
3. Press (B).
●
If you selected the data save option, the
run timing result screen will appear. To
return to the Timekeeping Mode, press
any button besides (E).
●
If you select the data delete option, the
watch returns to the Timekeeping
Mode.
●
Measuring Lap Times
1. Start run timing.
l
Starting Run Timing
2. Press (D).
Each press of (D) displays the elapsed
time of the current section (lap time) to
appear.
Split time, running distance
Lap time
3. Press (A) or (C) to return to the run timing
screen.
●
If you do not perform any button
operation, the watch will return to the
run timing screen automatically after
about 10 seconds.
Note
●
You can use G-SHOCK MOVE to
specify whether [SPLIT TIME] or
[DISTANCE] is displayed.
Changing Display
Information During Run
Timing
One of three screens can be displayed during
run timing (Training Mode), and you can
specify the items you want to appear on each
screen.
This means you can configure a screen with
the items you want to monitor and display that
screen while you train.
l
Specifying the Screen to be Displayed
During Running (RUN FACE)
You can navigate between display screens by
pressing (A).
Example:
Setting Up Alerts
You can use G-SHOCK MOVE to specify alert
intervals to keep you informed of your calories
burned and elapsed time while training. Then,
the watch will perform a sound and/or vibration
alert operation whenever an alert interval
value is reached while you are training. Use
watch operations to enable or disable alerts.
l
Specifying the Alert Interval (Target Alert)
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (B).
This displays the Training Mode screen.
3. Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
Watch Operation Guide 3568
26