Casio 5554 - Split Times and Lap Times; Measuring Elapsed Time; Measuring a Split Time

Split Times and Lap Times
●
Split time
A split time is the time elapsed from the start,
up to any point along the course of an event.
You can use the operation shown below to
take split time readings.
D
B
B
D
Goal
Split 3
Split 2
Split 1
Start
●
Lap time
A lap time shows the time elapsed during a
specific lap around a track, etc.
D
B
B
D
Goal
Lap 3
Lap 2
Lap 1
Start
Measuring Elapsed Time
1.
Use the operations below to measure
elapsed time.
D
D
D
D
Stop
Resume
Stop
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Stopwatch number
Stopwatch number
After first hourFirst hour
1/100 seconds
SecondsSeconds
Hours MinutesMinutes
2.
Press (B) to reset the elapsed time to all
zeros.
Measuring a Split Time
1.
Press (A) to display [SPL].
2.
Use the operations below to measure
elapsed time.
●
Each press of (B) causes the elapsed
time up to that point (split time) to be
indicated for eight seconds.
D
B
D
Stop
Split
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
Stopwatch number
Stopwatch number
After first hourFirst hour
1/100 seconds
SecondsSeconds
Hours MinutesMinutes
3.
Press (B) to reset the elapsed time to all
zeros.
Operation Guide 5554
11