Configuring Stopwatch
Target Time Settings
You can use G-SHOCK Connected to
configure settings for up to 10 target times.
Target times can be set in one-second units,
for a total of up to 24 hours.
●
For information about target times, refer to
the information below.
l
Overview
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (D) for about two seconds.
When a connection is established
between the watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
phone screen to configure stopwatch
target time settings.
Configuring Programmable
Timer Settings
You can use G-SHOCK Connected to
configure programmable timer settings and
create a group of multiple timers.
●
For information about the programmable
timer, refer to the information below.
l
Overview
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (D) for about two seconds.
When a connection is established
between the watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
screen to configure the programmable
timer settings.
Note
●
To change a timer title or delete a timer,
tap [Edit].
Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
Connected causes the watch’s World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Note
●
G-SHOCK Connected World Time lets
you select from among approximately
300 cities as the World Time City.
●
Selecting a World Time City
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (D) for about two seconds.
When a connection is established
between the watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
●
You can check the World Time by
entering the Dual Time Mode.
Operation Guide 5554
6
To Next Page
Loading...
Need help?
General
