To Next PageTo Next PageWhy does my Casio 5699 alarm not sound?
An alarm may not sound on your Casio Watch if the alarm settings are not configured correctly, or if the hourly time signal is disabled. To resolve this, configure the alarm settings and enable the hourly time signal.
What to do if the current time indicated by the minutes is wrong on my Casio 5699?
If the current time shown by the minutes is incorrect on your Casio Watch, the summer time setting might be wrong. You should select the correct summer time setting.
How to return to the Timekeeping Mode on Casio Watch?
To return to the Timekeeping Mode on your Casio Watch, hold down the (C) button for at least one second.
General advice on watch use, focusing on water resistance and band care.
Explains water resistance ratings (e.g., 5, 10, 20 Atmospheres) and their usage limits.
Advice on band tightness, care, and signs of wear to prevent breakage or loss.
Warns against extreme temperatures affecting watch performance and LCD visibility.
Discusses watch resistance to impact and effects of magnetism on timekeeping.
Advises on avoiding chemicals and proper storage to prevent damage and discoloration.
Instructions for cleaning and maintaining the watch and its band.
Highlights risks like rust, premature wear, and skin irritation from improper care.
Details on battery replacement, initial battery, and low battery indicators.
Introduces key watch functions like Telememo, World Time, Alarm, Stopwatch, and Timer.
Explains the function of buttons A, B, C, and D in different modes.
Identifies and explains common indicators on the watch face and LCD.
Describes how to switch between different watch modes using the C button.
Explains how to cycle through display information in Timekeeping Mode using button A.
Step-by-step guide to setting the current digital time and date.
How to switch between 12-hour and 24-hour display formats for digital time.
Instructions for enabling or disabling summer time for digital display.
Procedure for setting the analog time using the Hand Setting Mode.
How to view the current time in various cities worldwide.
Steps to adjust the time for a selected World Time City and its summer time.
Guide to setting up daily alarms and snooze alarms.
Instructions to turn the hourly time signal on or off.
How to test the alarm sound and stop it.
Steps to turn off an active alarm or the hourly time signal.
How to start, stop, and resume the stopwatch to measure durations.
Procedure for capturing intermediate times during a stopwatch measurement.
How to record times for first and second place finishers using the stopwatch.
Guide to setting the countdown duration for the timer in 1-minute units.
Instructions for operating the countdown timer and stopping the tone.
Details on how to input names and phone numbers into the Telememo.
How to retrieve and view stored records in the Telememo.
Steps to edit existing entries in the Telememo.
Procedure for removing records from the Telememo.
List of cities and their corresponding time zone offsets.
Reference for characters available for input in Telememo and other modes.
Solutions for common problems like incorrect time, missing alarms, or signals.
General
